EN-16
Defender 6000 Indicators
3. OPERATION
3.1 Turning the Scale On/Off
To turn the scale on, press and hold the
On/Zero Off
button for 1 second. The scale performs a display test,
momentarily displays the software version, and then enters the active weighing mode.
To turn the scale off, press and hold the
On/Zero Off
button until
OFF
is displayed.
3.2 Weighing Mode
Use this application to determine the weight of items in the selected unit of measure. This mode is the factory
default setting.
3.2.1 Enter the Mode and Start Weighing
To enter the weighing mode from any application mode:
1. Press and hold the
Mode
button until
wWeIGH
is displayed.
2. If needed, place an empty container on the pan and press the
button to tare.
3. Add sample to the pan or container. The display shows the weight of the sample.
Note:
Please refer to the
Check
section for how to use Check in the Weighing mode.
3.2.2 Accumulation and Statistics
The Accumulation feature enables manual or automatic totalizing of displayed values. Statistical data (total
accumulated weight, min/max weights, pieces, percent, and total number of samples) is stored in memory for
review and printing. Accumulation works together with each application mode except Filling, but the
accumulation data will be cleared when change to another mode.
3.2.2.1 Settings
There are four accumulation options:
Off (
OFF
):
disable accumulation function.
Manual (
mMANU
):
press the
M+
button to do acuumulation manually.
Auto (
AUtO
):
the scale will perform accumulation automatically.
Accept (
ACCEPt
):
the scale will perform accumulation automatically in the
Check
mode when the weight
on the pan is acceptable between the under and over value you set.
To set accumulation options:
1. Long press the
Menu
button until you see
C.A.L
.
2. Short Press the
No
button one time. When you see
S.E.t.U.P
, press the
Yes
button.
3. Short Press the
No
button several times to navigate until you see
ACCUmM
. Press the
Yes
button.
4. Short Press the
No
button several times to select the accumulation option you want. The four options have
been introduced above. Then press the
Yes
button to confirm.
5. Press the
Exit
button to exit.
3.2.2.2 Accumulation
Manual
Place the item on the scale and press the
M+
button to add the weight to accumulation. The ∑ pointer will keep
flashing until the weight is removed and the platform is stable.
Auto
Place the item on the scale. The displayed value is accumulated automatically. The ∑ pointer will keep flashing
until the weight is removed and the platform is stable.
Accept
Place the item on the scale in check mode. The displayed value is accumulated automatically when the weight
is acceptable between the under and over value you set.
3.2.2.3 Viewing and Clearing Statistical Data
When the pan is cleared, press the
M+
button to view the accumulation and statistics results.
To clear the accumulation data, press the
CLR
button on i-DT61XWE terminal or the
button on i-
DT61PW terminal while the statistical information is displayed. When the display shows
Clr.aCC
, press the
Summary of Contents for Defender i-DT61PW
Page 2: ......
