OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
18
Stop at End:
When this option is “No”, the test will run until you click the
“Stop Test” button. The final temperature and pressure setpoints will be
maintained indefinitely. If this option is “Yes”, the test will end when all
steps in the Test Profile are complete.
DAQ Rate:
Set the interval for data points to be recorded (hh:mm:ss).
Temp Unit:
Choose either F (Fahrenheit) or C (Celsius)
Press Unit:
Choose units for cell pressure (psi or MPa)
Status Light Settings:
Enter the threshold (in Bc) for each level on the
status indicator. When the consistency of the cement reaches one of
these thresholds, the corresponding light(s) on the indicator will turn on.
4. On the Profile tab, select a Test Profile from the list. To create a new Test
Profile, click the “Open Builder” button (page 19).
5. Click “Save”
