OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
31
The Utilities screen sets general parameters.
1. Enter the values for each parameter:
Display Temperature:
The instrument has two thermocouples. One is in
the cement sample in the cell. The other is in the heating jacket (Bath).
Use this option to determine which thermocouple will be used to control
the temperature. Sample is recommended during testing. But Bath is rec-
ommended during pre-heat.
Temperature:
Choose either °F (Fahrenheit) or °C (Celsius)
Pressure:
Choose units for cell pressure (psi or MPa).
2. Select “Apply” when done.
Onboard
Display
Utilities
