OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
33
The Manual Control screen can be used to set the temperature, pressure,
and/or motor when a test is not running. The relevant switch (HEAT, PUMP, or
MOTOR) must be set to MANUAL.
1. On the left-hand side of the screen, choose Temperature, Pressure, or
Motor.
2. Enter the setpoint in the box.
3. Select “SET” when done.
When setting the temperature with Manual Control, the controller will use
the thermocouple specified in the Utilities screen (Bath or Cell). If the Cell
thermocouple is selected, a thermocouple must be connected to the port
on the bulkhead to prevent alarms.
Onboard
Display
Manual Control
