Clamp pincer CP 10 / CP 20 / CC 20
7
Description of PC software
7.2 Status
menu
•
Display of the closing force curve (progression of the closing force over time) of the most recent closure or
any selected closure.
•
Display of the process data for the most recent closure or any selected closure.
Fig. 31:
Status menu
Input field/Display field/Option
field
Description
Closing force
The graphic displays the progression of the closing force over time for the
selected closure operation. When closure has been performed correctly,
the summit of the curve must lie within the green shaded area.
If this is not the case, contact your service partner without delay.
Comment
For input of user-defined texts (maximum 10 lines). The comments refer
to the selected closure operation and are included in the single report for
that closure, but not in the multiple report (see below for an explanation).
The text is not saved in the device.
Single report / Multiple report
The closing force graphics for a closure operation, together with other
process data, can be called up by pressing the buttons “Single report”
(documentation of an individual closure operation) or “Multiple report”
(collective documentation of several closure operations).
(See chapter 5.3, p. 5-29).
Process data
Shows the process data saved in the device for each closure. These data
are used when creating the “Single report”.
The process data displayed relate to the selected closure (counter).
Issue 11.15
08902961
7-38
