Clamp pincer CP 10 / CP 20 / CC 20
6
Maintenance and repair
Issue 11.15
08902961
6-31
6
Maintenance and repair
If you have questions about maintenance and repair, please contact your OETIKER representative.
Alternatively use the following help desk numbers:
•
Americas: T+1 -989-635-3621
•
Europe, Middle East, Africa: T+49 7642 684-0
•
Far East: T+86 2226971183
•
India & Asian: T+91 7721055544
OETIKER spare parts
In order to ensure the fast and accurate delivery of spare parts, a clear purchase order is essential. It must
include the following information:
•
Product name, software version (see chapter 7.1, S. 7-37)
•
Type designation and article number (see technical data sheet)
•
Serial number (engraved on the pincer)
•
Name of spare part and number of units required
• Shipping
method
• Full
address
6.1
General safety instructions on maintenance and repair work
•
Clamp pincer CP 10 / CP 20 / CC 20 is designed for continuous use at a closure frequency of two closures
per minute.
After 40,000 closures, scheduled service must be performed. Otherwise the warranty lapses.
Servicing of the pincer body must be performed only by OETIKER.
•
Cleaning, lubrication and maintenance work should only be carried out by authorized technical personnel in
accordance with the enclosed maintenance instructions and local safety regulations.
Failure to observe these instructions and regulations may lead to personal injury and property damage.
•
For maintenance and repair
of pincer heads
, only use OETIKER original spare parts.
•
Following initial commissioning, clamp pincer CP 10 / CP 20 / CC 20 should be cleaned daily or weekly,
depending on level of cleanliness or debris buildup.
•
Never immerse clamp pincer CP 10 / CP 20 / CC 20 in water or other liquids.
•
When the service led illuminates, clamp pincer CP 10 / CP 20 / CC 20 must be sent to OETIKER. There is
no service work that the customer can or should perform on the clamp pincer. Any attempt at service work
will void the warranty.
•
In the event of oil loss, send cordless clamp pincer CP 10 / CP 20 / CC 20 to your regional OETIKER
service center.
