Clamp pincer CP 10 / CP 20 / CC 20
2
Basic safety instructions
Issue 11.15
08902961
2-7
2
Basic safety instructions
2.1 Using the instruction manual
•
Make sure that this instruction manual is always kept close at hand ready for use.
•
Pass this instruction manual on to the next owner or user.
•
Please read this instruction manual carefully before commissioning clamp pincer CP 10 / CP 20 / CC 20.
Familiarize yourself with all settings and their functions.
Anyone involved in setting up, commissioning, maintaining or repairing the unit must have read and
understood the instruction manual and in particular the safety instructions.
2.2 Proper
use
The unit may only be used for the intended purpose and under technically safe and fault-free conditions.
Clamp pincer CP 10 / CP 20 / CC 20 is only intended for use to close genuine OETIKER clamp models. No
other use is permissible.
Correct usage also covers observance of this instruction manual and compliance with the technical data.
Any use not in accordance with the prescribed usage shall be regarded as incorrect usage.
Unintended use
Clamp pincer CP 10 / CP 20 / CC 20 employs state-of-the-art safety features and is safe to operate. Residual
dangers remain if it used incorrectly or by untrained personnel. The manufacturer bears no responsibility for
injuries to personnel and damage to property arising from improper use of clamp pincer CP 10 / CP 20 / CC 20.
In such cases the operating company is solely responsible.
2.3
General safety information
•
If the safety instructions are disregarded there is a risk of potentially fatal injuries, damage to the health of
personnel and damage to property on the machine or surroundings.
•
Retain all operating instructions and safety instructions; they are essential for many years of fault-free
operation of clamp pincer CP 10 / CP 20 / CC 20.
•
Before using clamp pincer CP 10 / CP 20 / CC 20, review and be aware of surroundings. Only if no hazards
are present may the clamp pincer be activated.
•
Use only clamp pincers CP 10 / CP 20 / CC 20 which are in proper working condition. Inspect for damage
prior to each use.
•
Maintenance and repair work should only be carried out by qualified specialists.
•
Clamp pincer CP 10 / CP 20 / CC 20
– may only be used by persons who are familiar with its use and have been informed of the risks.
– may only be used in working areas where the lighting intensity is at least 400 Lux or where daylight
prevails.
– may only be operated by a single user.
