OEM DOME, User Manual, Page: 54 / 206

DOME
Transport and unpacking
EN - 10
2.3 - RECEPTION OF THE MACHINE
Upon reception of the machine make sure that the pack-
ing is complete and not damaged. Should the packing
be complete, remove it as specify at point 2.4 (aside
from different manufacturer’s instructions).
Check if the instruction booklet is inside the packing
as well as the components specified in the transport
documentation.
In case any damage or defect is found:
a- Inform immediately the transport company and your
agent, both by phone and by registered letter with
return receipt;
b- Manufacturer shall also be informed.
IMPORTANT
The oven is shipped completely assem-
bled.
2.4 - UNPACKING (Fig. 3)
To remove the packing from the machine proceed as
follows:
• Cut the straps (1) that tie up the carton.
• Open the carton (2), by removing the metallic clips.
• Remove the cardboard packaging (2).
• Check if everything is complete.
• Remove packaging elements, which block external
stones and internal refractory stones.
• Check if the delivery is complying with the PACKING
LIST.
DANGER
The packing elements ( plastic bags, car-
ton, nails, etc...) shall be kept away from
the reach of the children, since they are
potential danger sources, so, they shall
be gathered and sent to special centres to
correctly be recycled.
IMPORTANT
Any damage or defect or non conformity
with the packing list should be immediately
reported and, in any case, it should be noti-
fied within 8 days from the date of reception
of the machine. On the contrary the goods
are to be considered as accepted.
FIG. 3