TOYOTA
Reference
400CF
Procedure
Issue A 8/14/14
Page | 9
5.
Rear Speaker Bypass Cable Installation
a.
Remove the dead pedal in the driver-side
kick panel area. Using the panel tool, wedge
this piece out of place and pull directly
toward you.
(Fig. 5-1)
b.
Remove the driver-side threshold and driver-
side kick panel by unscrewing the black
locking tab.
(Fig. 5-2)
c.
Run all Wiring and Cables above the
accelerator pedal and steering column into
the driver-side kick panel. Run neatly and
out of the way. Use cable ties as necessary.
Leave any extra slack on the floor for now.
(Fig. 5-3)
d.
In the kick panel area with a 10 mm socket
wrench remove the factory speaker module.
Loosen with 10mm socket and then pull out
directly towards you.
(Fig. 5-4)
Fig. 5-1
Panel Tool
Fig. 5-2
Fig. 5-3
Fig. 5-4
10mm Socket
