TOYOTA
Reference
400CF
Procedure
Issue A 8/14/14
Page | 13
e.
Run power wires to the battery by following
the direction of the factory wiring harness
towards the battery. Secure using cable ties
as necessary.
(Fig. 6-7)
f.
Use a wire stripper to strip 3/8" off the end of
each power wire.
(Fig. 6-8)
g.
Connect the power wires to the fuse holder
by inserting the (smaller) 14-gage stripped
power wire into the Blue butt connector and
crimp.
(Fig. 6-9)
i.
Insert the (larger) 12-gage stripped power
wire into the Yellow butt connector and
crimp.
j.
Apply heat to activate the solder and heat
shrink insulator for the best connection
possible.
(Fig. 6-10)
Fig. 6-8
Wire Strippers
Fig. 6-7
Fig. 6-9
Crimper
Fig. 6-10
Heat Gun
