TOYOTA
Reference
400CF
Procedure
Issue A 8/14/14
Page | 4
c.
The Wires run through the radio cavity can rest
on the driver’s si
de floor for the time being.
(Fig 3-3)
d.
In the radio cavity connect the factory 10-pin
male connector to the OEM Audio Plus Quick
sync wiring harness female 10-pin connector.
(Fig 3-4)
e.
Using a pick tool or a precision flat head
screwdriver, remove the brown terminal from
your factory 6-pin connector.
1.
First
gently
release the locking tab on
top of the connector (the tab only needs to
lift slightly to unlock terminals).
(Fig. 3-5)
2.
Remove the brown factory wire by
gently
lifting the small white locking tooth inside the
connector.
(Fig. 3-6)
Fig. 3-5
Pick Tool
Fig. 3-4
Fig. 3-3
Fig. 3-6
Pick Tool
