TOYOTA
Reference
400CF
Procedure
Issue A 8/14/14
Page | 5
3.
Lift the tooth and pull the terminal out
from the back of the connector
simultaneously.
(Fig. 3-7)
f.
Plug the brown terminal from your factory 6-pin
connector into the open #5 Terminal on the rear
speaker bypass umbilical cable (first available
opening next to the blue wire). You'll hear it click
when the wire locks into place. Press the locking
tab back into place till it clicks.
(Fig. 3-8)
g.
Plug the rear bypass umbilical cable into your
OEM Audio Plus Quick-Sync Wiring Harness 6-
pin connector. Run the other side of the rear
speaker bypass cable through the radio cavity to
the driver-side kick panel area.
(Fig. 3-9)
h.
Remove Glove box. On the passenger side of
the vehicle open glove box and disengage the
glove box damper on the right side. Squeeze
sides of glove box and pull down and out in one
motion to remove.
(Fig. 3-10)
Fig. 3-8
Fig. 3-9
Fig. 3-10
Fig. 3-7
Pick Tool
