TOYOTA
Reference
400CF
Procedure
Issue A 8/14/14
Page | 15
c.
Remove the outward-facing 10mm bolt used
to mount the driver-side lower front dash
panel.
(Fig. 8-3)
d.
Install the "
B
" labeled bracket together with
the 10mm bolt. Positioning the bracket in the
mounting location for the amplifier to mount
adjacent to the kick panel.
(Fig. 8-4)
e.
Plug the White and Gray 22-pin connectors
from the Quick-Sync Harness into their
designated receptacles on the DSP
Amplifier.
(Fig. 8-5)
f.
Plug the 6-pin Gray connector from the Sub
cable into its designated receptacle on the
Sub Amplifier.
(Fig. 8-6)
Fig. 8-3
10mm Wrench
Fig. 8-5
Fig. 8-6
Fig. 8-4
10mm Wrench
* See Series 2 Connectivity Addendum
* See Series 2 Connectivity Addendum
