190
Pompa di calore ad inverter per piscine
IT
Interrogazione dei parametri
4.13
ATTENZIONE: Questa operazione serve a facilitare futuri interventi di
manutenzione e riparazione. Le impostazioni/confi gurazioni standard devono
essere eff ettuati solo da un professionista.
ATTENZIONE: Qualsiasi modifi ca non autorizzata delle impostazioni defi nite
annullano automaticamente la garanzia.
Le impostazioni del sistema possono essere verifi cate e regolate sull'unità di comando.
A questo scopo, seguire la procedura descritta di seguito:
Passo 1: Tenere premuto il pulsante per 3 secondi fi nché non abbia raggiunto
la modalità che consente convalidare le impostazioni.
Passo 2: Azionare i pulsanti freccia e fi nché non compare sul display
l'impostazione che desidera modifi care.
Passo 3: Premere il pulsante
per poter iniziare la confi gurazione dell'impostazione.
Il valore lampeggia.
Passo 4: Premere i pulsanti freccia e per regolare il valore.
Passo 5: Premere il pulsante
per convalidare il nuovo valore immesso.
Passo 6: Premere il pulsante
per tornare alla schermata principale.
Se l'unità di comando non va in servizio dopo 60 secondi, essa si spegne automaticamente.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
26
4.12 System parameter query
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING: Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps:
Step 1:
Keep pressing 3s on
until you enter the settings verification mode.
Step 2:
Press
and
for see the configured parameters.
Step 3:
Press
to select the setting to be modified, the value is blinking.
Step 4:
Press
and
to adjust the setting value.
Step 5:
Press
to set the new value.
Step 6:
Press
to return to the main screen.
If not 26peration for 60s, it will be exited automatically.
4.13 Forced de-icing function
Long press
and
3 seconds to enter forced de-icing.
Passo 1
Passo 4
Fase 3
Passo 6
Passo 2
Passo 5
"lampeggiante"
