OE Max Controls CSDJ Plus, User Manual

Page: 27 / 284

Chapter 2. Installation and wiring 2 - 3
2.1 Check Items upon the Delivery of the Product
Check the following items when the product is delivered.
1. Check if the correct product is delivered.
(check with the specification table of servo motor and drive.)
2. Check if the product is damaged.
3. Check if the motor shaft rotates smoothly when turned by the hand.
Check if it moves as if it’s locked. (except for the motor with brake attached).
4. Check if the coupling part is loose.
Contact the agency where you've purchased or the FA marketing department of
OEMax Electronics for any problems.
Also, check if there is any loosening of various bolts or damage in lead wires or
insulation materials.
Warning
!
C S D J
-
0 4 B X
Voltage
B: 220VAC
C: 24VDC
Rated Output
A3: 30W 04 : 400W
A5: 50W 06: 600W
01:100W 10: 1kW
02:200W
2
Fig 2.1 Drive Display
V R S F - 2 5 C
-
2 0 0
- S P
Reducer Type
Reduction Ratio
03 : 1/ 3
05 : 1/ 5
09 : 1/ 9
15 : 1/15
25 : 1/25
Applied Motor
SPT : CSMT Motor
※
Backlash grade of the reducer
cannot be adjusted.
The grade is fixed when delivered.
Backlash Grade
B : 0.7
˚
C/D/E : 0.5
˚
Capacity of the Applied Motor
030 : CSMT-A3
050 : CSMT-A5
·
·
·
800 : CSMT-08
T
Fig 2.2 Reducer Display