CHAPTER 3
28
Operation
that are all the same size. If you need to change any of the scan
parameters, like scan area, use the Odyssey
®
Application Software to
start the scan rather than the keypad (see the Odyssey User Guide).
Scans are initiated from the keypad by pressing the
Start
button.
Presets are chosen by scrolling through the list using the
Next
button
and pressing the
Start
button when the desired Preset is displayed.
Scanning will start and will continue until the entire scan area
specified in the Preset has been scanned.
File names are automatically assigned to scans started from the
keypad using the first 7 characters of the chosen Preset file, followed
by the date and a sequential index number. An example would be
Membran-12-10_5
in which Membrane was the Preset name, December 10 was the
month and day of the scan, and this was the 5th scan initiated from
the front panel keypad on December 10.
Scans initiated from the Odyssey front panel are stored in the
public
scan group. They can then be downloaded for analysis with the
Odyssey Application Software.
Downloading Scans
The following procedure can be used to download scans from the
Public
scan group (on the Odyssey instrument) to the Odyssey Appli-
cation Software. (Complete details can be found in the Odyssey User
Guide.)
1) Create a new Odyssey project or open an existing project.
2) Choose
File > Scan > Download Scan
.
