CHAPTER 1
2
Operational Information
The Odyssey
®
Infrared Imager is certified as a Class I laser product,
containing a Class IIIb laser. This means that hazardous laser
radiation is
not
emitted outside the instrument. Radiation emitted
inside the instrument is confined within protective housings and
external covers. A series of safety interlocks ensures that the laser
beam cannot escape during any phase of user operation.
The CDRH implemented regulations for laser products on August 1,
1976 (CDRH radiation performance standard 21, Code of Federal
Regulations Chapter 1, Subchapter J). Compliance for products
marketed in the United States is mandatory. The label that must be
attached to laser products marketed in the United States is Figure
1-1 and is located on the rear panel of the Odyssey System,
indicating compliance with CDRH regulations.
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
LI-COR, INC.
4421 SUPERIOR ST.
LINCOLN, NE 68504 USA
DISCONNECT POWER BEFORE SERVICING
THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1)
THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
THIS PRODUCT COMPLIES WITH CDRH
RADIATION PERFORMANCE STANDARD 21
CFR CHAPTER 1 SUB-CHAPTER J.
Made in U.S.A.
Patents Pending
Model: 9120
S/N: ODY-
INPUT
100-127V
~
8A
200-240V
~
5A
50/60HZ
Figure 1-1.
