113
At the end of the diagnostic, summary results are given at the bottom
of the page for the Motor Control Card, Signals Board, and System
Resources. All of these results should indicate
PASSED
. If any of these
results indicate
FAILED
, contact LI-COR Technical Support (1-800-
645-4260) or your local LI-COR office or distributor.
A variety of tests are performed during the User Diagnostic. Most of
these tests are meaningful only to LI-COR Technical Support staff, so
only summary results are displayed. LI-COR, or your Distributor, may
ask for a copy of the complete test results. The test results can be
transferred to a file by clicking the
Download
button. The file can
then be transferred to LI-COR Biosciences via mail or as an e-mail
attachment.
If you have a gateway address and DNS server address specified on
the Network Setup page, you can also e-mail the file directly using
the
Transfer Options
area. The
Send To
address for LI-COR technical
support is already entered. Fill in your e-mail address in the
Reply
Back To
field, add any descriptive
Comments
and click the
button. (If you are using a dial-up account, make sure you are logged
on before clicking
.)
The Odyssey
®
Imager should be used with Internet Explorer version
4.0 or above, or the equivalent. If you don’t know the version number
of your browser, or are using some other browser, you should run the
browser test on the Utilities page to verify that your browser can run
the Odyssey software. With some older browsers, certain pages may
display correctly, but important functions like scanning may not work
correctly.
Browser Test
