32
Unit doesn’t power up
•
Check the connection of the power cord from the machine to the wall
outlet.
•
Plug a lamp or radio into the outlet to see if the wall outlet has power. If a
light switch controls the outlet, turn it on.
•
Check to see that the light on the power supply lights up. If you have verified
power from the outlet, you may have a faulty power supply. Contact your
local dealer for service.
Don’t feel a resistance change
•
Increase resistance level to 20 and pedal for 30 seconds. If you feel a
difference in the resistance, then the brake is working properly.
•
Are the cables connected correctly? Refer to the assembly instructions
and check connections. When re-connecting the cables, make sure you
feel each connector snap into place or hear a click that indicates a proper
connection.
•
If the issue persists, contact your local dealer for service.
“No HR” is displayed when doing
heart rate controlled programs
Heart rate controlled programs require that you wear a wireless chest strap.
First, verify that the wireless chest strap is working properly:
•
Make sure the electrodes of the chest strap are against your bare skin. The
electrodes are the ribbed portion on the back of the chest strap.
•
For better contact, use water to moisten the electrodes on the side of the
wireless chest strap that sits against your skin.
•
Make sure the logo is facing away from your body and is right side up.
•
Make sure you have placed the chest strap at the bottom of your pectoral
muscles. Some adjustment to the strap may be necessary for the strap to
get an accurate reading.
•
Make sure the strap is snug against your body, but not tight enough to
restrict breathing.
•
Have someone else try the strap standing next to the machine to see if it
works on him/her.
•
There may be interference with another electrical product (lights, TV,
personal stereo, wireless network, MP3 players, phones, etc...). Turn off
any other electrical product and check to see if the problem is resolved.
•
The battery in the chest strap may be faulty or worn out; replace the battery
and retest.
•
If “NO HR” is still displayed on the console, contact your local dealer for
service.
Console blinks on / off
•
The console connections could be faulty. Refer to the assembly instructions
and check connections.
•
If the issue persists, contact your local dealer for service.
LED always toggling
•
Press the Enter key during a workout to stop the LEDs from toggling.
tROuBlesHOOtinG & FaQs
electronic issues
