Ochsner AIR BASIC 109, Operating Manual/Installation Manual

Page: 56 / 92

BA_AIR_BASIC_ELW_Multitower_OTE3_SW5x_CC_EN_V08.docx Page 56 of 92
6.3.7 Sensor
Figure 68: Electric schematic with buffer tank/low loss header
CAUTION Schematic diagram: The schematic does not include all fittings/safety elements/components
required for installation. Install the system according to the relevant standards and local guidelines!
KEY :
Low voltage cables must be routed away from
240 V/400 V cables!
a ) Heat pump terminal strip
1) Wiring, charging pump buffer/low-loss
header
2) Top buffer sensor TPO
3) Middle buffer sensor TPM
Configuration with buffer or low loss header:
2: Puffer 2 Fühler
ESC ENTER
06-076 WAERMEVERTEILER
Applikationstyp Wärmemanager
HEAT DISTRIBUTOR
Heat manager application type
2: Buffer 2 sensor