Ochsner AIR BASIC 109, Operating Manual/Installation Manual

Page: 16 / 92

BA_AIR_BASIC_ELW_Multitower_OTE3_SW5x_CC_EN_V08.docx Page 16 of 92
4 Indoor unit
Two different indoor units are available for the air/water heat pump:
- Golf Midi indoor unit
- T200 MULTI TOWER indoor unit
4.1 Golf Midi indoor unit
4.1.1 Indoor unit installation
Figure 14: Indoor unit dimensions and minimum clearances
The heat pump must be acoustically insulated from the floor. Reverberant (sound-reflecting) rooms can
increase the perceived noise emission. There is always a possibility of transmitting vibrations/noise to
adjacent rooms, which should be considered when engineering the installation. The higher the heating
output of the heat pump, the higher the sound emissions from the appliance compressor.
Figure 15:
Indoor unit tilt height
Figure 16 Indoor unit dimensions
40 cm
min 40 cm
min 40 cm
m
in
1
00
cm
65
cm
m
in
5
c
m