Ochsner AIR BASIC 109, Operating Manual/Installation Manual

Page: 36 / 92

BA_AIR_BASIC_ELW_Multitower_OTE3_SW5x_CC_EN_V08.docx Page 36 of 92
Figure 41: Removing the hydraulic hoses
- Remove the 4 hydraulic hoses and the thermal
insulation element.
Figure 42: Undoing the connecting screws
- Undo the 4 screws on the tabs at the front of
the appliance.
Figure 43: Separating the appliance sections 1
- Pull the top section towards the front.
Figure 44: Separating the appliance sections 2
-
Tilt the top section towards the back. Use the
grip rail for better grip during transport.
Figure 45: Setting down the T200 top section
- Set the top appliance section on a pad or mat
to avoid damage.
Assembling the appliance sections:
Assemble the appliance sections in reverse order.
The positioning aids and dotted line markings
facilitate sliding the top appliance section into
the guide on the lower section.