background image

135

  Press/release the A button to access Fly, Log, and History.

  Press/hold the A button for 2 seconds to view the common

Secondary Display (Temperature and Time of Day).

  Press/hold the A and S buttons simultaneously for 2

seconds to access the SET menu (F > A > U > T).

  Press/release the S button acknowledge/silence Alarms.

  Press/hold the S button for 2 seconds to access Battery/

TMT Status screens.

  Press the L button to activate the Backlight.

When GAUG Operating Mode is selected and upon descending

to 5 FT (1.5 M), the ATOM will enter GAUG DIVE Mode.

NOTE:  Once a dive is made with the ATOM set

for GAUG Operating Mode, you must wait 24

hours after surfacing before the ATOM resets

and will operate as an Air or Nitrox dive com-

puter in NORM Mode or FREE Dive Mode.

GAUG DIVE MAIN DISPLAY (Default),

information provided includes (Fig. 123) -

>  Graphic GAUG.

>  LINK icon and Tank Pressure with symbol PSI (or BAR), if

TMT 1 is active and linked.

>  Current Depth and FT (or M) icon.

Fig. 123 - GAUG DIVE MAIN

Gas Switching or

Buddy Pressure

Check is not avail-

able in GAUG

Mode.

Summary of Contents for ATOM 2.0

















































































































































































Reviews: