Oce VarioPrint 2045-65 DC Page 78 Job Manual Download

Page: 78 / 107

Océ VarioPrint 2045-65 DC Job manual

Clear a paper jam

Introduction

The paper jams can occur in the following sections of the Océ VarioPrint
2045-65 DC:

■

Automatic document feeder.

■

Finisher.

■

Paper compartment.

■

Processing unit.

To clear the paper jam, remove the original sheets or the paper from the trays.
The message box displays instructions for clearing the paper jam.

The notched grips of the doors and the covers that you must use are green. The
instructions refer to the grips.

The Océ VarioPrint 2045-65 DC can be configured so that only the Key
Operator clears the paper jams. In this instance, the message box displays a
request to call the Key Operator.

Clearing a paper jam

Read the error message.

Follow the instructions to clear the paper jam.

[58] Clear the paper jam

Follow the instructions to continue the job.

Note:

If the error is not recovered, call the Key Operator.

Summary of Contents for VarioPrint 2045-65 DC












































































































Search results

Summary of Contents for VarioPrint 2045-65 DC

Reviews:

Related manuals for VarioPrint 2045-65 DC

Brands by name

Popular brands

Oce VarioPrint 2045-65 DC, Job Manual

Search results

Summary of Contents for VarioPrint 2045-65 DC

Reviews:

Related manuals for VarioPrint 2045-65 DC

Brands by name

Popular brands