Oce VarioPrint 2045-65 DC Page 16 Job Manual Download

Page: 16 / 107

Océ VarioPrint 2045-65 DC Job manual

About the activity states of the Océ VarioPrint 2045-65 DC

Introduction

The message box gives you the information about the current state of the Océ
VarioPrint 2045-65 DC.

[4] The progress of a copy job

States of the machine

State

Description

Machine is
switched off

To switch the machine on, press the ON / OFF button on
the machine.
The machine needs eight minutes to warm up.

Ready to start a
job

The machine is ready to copy.

Ready to copy or
scan a next part

The machine is ready to copy next job part.
The state is activated by the combine key .

Ready to start a
job in the inter-
rupt mode

The machine is ready to copy in the interrupt mode.
The state is activated by the interrupt key

during job

processing. The suspended job continues after the inter-
rupt mode is exited.

Busy

The machine is processing a job.
The first line indicates the number of completed sets.
The second line indicates the number of originals to
copy.

Low power mode The machine has entered an energy save mode.

To switch from the low power mode, press any key.

Summary of Contents for VarioPrint 2045-65 DC












































































































Search results

Summary of Contents for VarioPrint 2045-65 DC

Reviews:

Related manuals for VarioPrint 2045-65 DC

Brands by name

Popular brands

Oce VarioPrint 2045-65 DC, Job Manual

Search results

Summary of Contents for VarioPrint 2045-65 DC

Reviews:

Related manuals for VarioPrint 2045-65 DC

Brands by name

Popular brands