Oce VarioPrint 2045-65 DC Page 20 Job Manual Download

Page: 20 / 107

Océ VarioPrint 2045-65 DC Job manual

Get started

Switch the Océ VarioPrint 2045-65 DC on or off

Introduction

Normally the Key Operator switches the Océ VarioPrint 2045-65 DC on or off .
You can switch the machine off and then back on to correct an error.

Before you begin

■

The Océ VarioPrint 2045-65 DC can have a key switch to protect access.
Make sure that the key is available before you switch the machine on or off.

Illustration

[7] The ON / OFF button

Switching the Océ VarioPrint 2045-65 DC on

Turn the key to the right, to the horizontal position, if a key is available.

Press the green ON / OFF button.
The color of the LED in the button lights up.
The system requires eight minutes to reach the operating temperature.
When the machine is ready, a message is displayed.

Summary of Contents for VarioPrint 2045-65 DC












































































































Search results

Summary of Contents for VarioPrint 2045-65 DC

Reviews:

Related manuals for VarioPrint 2045-65 DC

Brands by name

Popular brands

Oce VarioPrint 2045-65 DC, Job Manual

Search results

Summary of Contents for VarioPrint 2045-65 DC

Reviews:

Related manuals for VarioPrint 2045-65 DC

Brands by name

Popular brands