Oce TCS400, User Manual

Page: 46 / 321

46 Océ TCS400 User manual
Prepare the Océ TCS400 for use
Change the display language of the Océ TCS400
Introduction
You can change the display language for the following components:
■
The controller applications
■
The printer operator panel
■
The scanner operator panel.
Change the language of the controller applications
You can change the display language of the controller applications (Océ
Settings Editor, Océ System Control Panel, Océ Queue Manager). You can
choose from 18 available languages. (see ‘
Parameters of supported languages ’
on page 258 )
If you have a keyboard, mouse and monitor with your Océ Power Logic
®
controller, you can access the controller applications local on the controller. If
you do not have a keyboard, mouse and monitor with your Océ Power Logic
®
controller, you must use Océ Remote Logic
®
to connect to the controller
applications.
Change the language of the operator panels
You can change the language of the printer operator panel from the on-line
screen and the off-line screen. You can change the language of the scanner
operator panel from the system screen. You can only toggle between two
languages. Make sure that the first language and the second language are
correctly defined in the Océ Settings Editor. You can choose from 15 available
languages.
Use the setting KO - System - Localization - Display languages - First
language to define the default language.
Use the setting KO - System - Localization - Display languages - Second
language to define the alternative language.
Note:
Only the first language and the second language defined in the Océ
Settings Editor are available on the operator panels.