Oce TCS400, User Manual

Page: 170 / 321

170 Océ TCS400 User manual
4
Use both hands to place both flanges in the dark blue saddles on the printer.
5
Use both hands to slide the medium under the paper guide. Place the media on
the printer as shown in the figure below.
The medium loads into the printer from the top of the media roll.
Make sure the medium makes contact with the paper guide.
6
The printer automatically draws the medium in the correct position.
When the printer loads the roll of media, the screen of the printer operator
panel shows the feedback.
Note:
The printer automatically detects the width of the media.