manualshive.com logo in svg

Oce PlotWave 340, Operation Manual, Page: 86 / 336

Share
Download
Oce PlotWave 340 Operation Manual Download Page 86

Restore the factory defaults 

Introduction

Sometimes you want to go back to the initial settings. You can restore the factory default settings
in Océ Express WebTools.

NOTE

Log in as a Key Operator to only restore the Key Operator settings. Log in as a System

Administrator to only restore the System Administrator settings. To restore all the factory

default settings you must log in as a Power User.

Procedure

1.

Open the [Configuration] tab, or the [Preferences] tab.

2.

Click [Restore defaults] in the upper right hand corner of the screen. A window opens.

3.

Click [Ok] to restore the factory default settings, or [Cancel] to close the window without restoring
the factory defaults.

Restore the factory defaults

86

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for PlotWave 340

















































































































































































































































































































































Reviews:

No comments