Oce DJDE, Reference Manual

Page: 163 / 255

Using Logical Processing RFEED Command
A29247-X4-X-8-7672
155
4.9 RFEED Command
The logical processing RFEED command allows you to change stock names on a page-by-
page basis without using DJDEs. The RFEED command allows you to specify paper fed
from different stocks if certain criterias are met on a record basis. RFEED is essentially an
extension of the RAUX-command in that it allows you to specify virtually any stock-name or
stock-reference without being limited to the AUX input bin.
TEST
Points to note
• Satisfaction of the RFEED-criteria will cause the current page to feed from the stock de-
fined in the RFEED command
• If a criteria is met, the stock-name/stock-reference will remain in effect until the next
RFEED-criteria is met or a new report is processed
• RFEED is overruled by a RAUX-logical-processing-statement
• RFEED is overruled by a DJDE-FEED
• RFEED is not available as a DJDE
• If RFEED switches to AUX-tray, an (additional) form may be printed on the sheet (see
“Configuring LCDS-Module Parameters” and “AUX_FRONT/AUX_BACK” in Adminis-
trator’s Guide)
• In a multiple RFEED-criteria-command, the order in which the criteria are specified
makes a difference in the job application. Once a criterion is specified, the system ig-
nores criteria checking for the rest of the page. The criteria checking resumes when a
page transition occurs. Consider this example:
PAPERSTK STOCKSET ASSIGN = (‚RED‘, red-ref),
ASSIGN = (‚BLUE‘, blue-ref),
ASSIGN = (‚GREEN‘, green-ref);
T1: TABLE CONSTANT = (‚ABC‘);
T2: TABLE CONSTANT = (‚DEF‘);
Parameter Definition(s)
TEST=
((test-exp,clu-def)[,...]) Test-exp::= references a criteria table to be used
Clu-def::= defines a stock to use for the page, either a stock-
name or a stock-reference
(see “Summary of STOCKSET statement com-
mand parameters”)