Oce DJDE, Reference Manual

Page: 190 / 255

Page- and Record-oriented DJDEs Dynamic Job Descriptor Entries (DJDEs)
182
A29247-X4-X-8-7672
RTEXT=
(
sc ,[ passnum |
ALL],[ line ,[ col
[, fontindex ]]])
This option has the following components:
sc
Specifies the message to be printed (1 to 132 characters). It is printed with the
first font specified in the FONTS parameter of the PDE command (refer to fontin-
dex).
passnum
May be either an integer number or the keyword ALL. An integer number speci-
fies the pass (copy ply) to which the text applies.
ALL
Specifies that the text applies to all copies. If there is more than one RTEXT pa-
rameter in a DJDE packet, passnum must be in increasing numeric order.
The default is passnum = 1.
line
Specifies the line number on which the first line of a block of RTEXT message is
printed. The default is line 1 for the first text string of the pass. Otherwise, the de-
fault is the next line of the page. Only one RTEXT parameter may be specified
per line for a passnum.
col
Specifies the column number at which the first character of a block of RTEXT
messages is to be printed.
The default is column 1.
fontindex
Identifies the index (starting with 1) of the PDE font with which the text is printed.
RTEXT=
rtext-id
rtext-id
This option is used to reference a cataloged file of RTEXT parameters previously
compiled by XDL.
RTEXT=
NONE NONE
Specifies that no text is to be printed on a separate page.
The default is NONE.
SAVE= This command is gracefully handled and ignored. It is always assumed that
SAVE=NO.
SHIFT=
(
v
1,
v
2
)
v
1
An integer value in dots for the amount of shift on the simplex page or the odd
(front) side of the duplex page. (Each dot is 1/300 of an inch.) Range for v1 is -
75 to 75.
v
2
A value in dots for the amount of shift on the even (back) side of a duplex page.
Range for v2 is -75 to 75. A standard size shift occurs if YES is specified (v1=75
and v2=-75).
DJDE Definition(s)