manualshive.com logo in svg

Oce DJDE, Reference Manual

Share
Download
Oce DJDE Reference Manual Download Page 200

Page- and Record-oriented DJDEs

Dynamic Job Descriptor Entries (DJDEs)

192

A29247-X4-X-8-7672

LOGO=
(

name

, HERE

[, (VADJ[, + | -
] 

tvalue

)]

[, HADJ[, + | 
-] 

tvalue

)][, H]

[, (INKS ,

in-

kindex

[, 

inkindex

]

[, ...])])

name

Specifies the name of a logo image file.

HERE
Specifies the position of the upper left corner of the logo as the top of the next 
printed line, at the currently defined left margin (see the MARGIN parameter of 
the LINE command).

tvalue

Typed value. Specifies the positioning of a logo as a decimal number with up to 
three optional digits to the right of the decimal point. 

tvalue

 may be specified as 

IN, CM, UN, DOTS or XDOTS.

VADJ
Specifies an adjustment to the vertical position of the top edge of the logo relative 
to the current position defined by the HERE option.

HADJ
Specifies an adjustment to the horizontal position of the left edge of the logo rel-
ative to the current position defined by the HERE option.

+ or -
Specifies a positive or negative positioning of the 

tvalue

. When following VADJ, 

the plus sign shifts the logo down and the minus sign shifts the logo up. When 
following HADJ, the plus sign shifts the logo to the right and the minus sign shifts 
the logo to the left.

H
Specifies that this logo is to be held and imaged without further references, at the 
same position and with the same scale factor on all subsequent pages until 
changed by a DJDE CANCEL= or ALTER=.

inkindex

Specifies which inks in the ILIST parameter of the IDR command override the 
corresponding inks specified in the inklist of the logo. The logo must be in colour 
format.
If one inkref in the list is omitted, commas must be used to maintain the relative 
positioning of the remaining ink references.
If more inkrefs are specified than contained in the inklist of the logo, the extra 
inkrefs are ignored.
If any of the inks to be substituted where specified in the logo definition with a 
NOSUBSTITUTION parameter ink requests are processed according to what is 
specified in the ISUBSTITUTE parameter of the ABNORMAL command.
Only references to primary colours are allowed.

DJDE

Definition(s)

Summary of Contents for DJDE
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands