Oce DJDE, Reference Manual

Page: 160 / 255

Summary of LMODIFY command parameters Using Logical Processing
152
A29247-X4-X-8-7672
4.7 Summary of LMODIFY command parameters
This command is completely gracefully ignored by the LCDS-Module.
TEST This parameter specifies the expression which is to be evaluated for de-
ciding if highlight colour will be applied to the current print line.
INKINDEX This parameter specifies the index of the desired ink out of inklist to be
used.
SELECT This parameter specifies the portion of the printline to be printed with high-
light colour.
Parameter Definition(s) Offline Online DJDE
TEST= test-exp
[, INK= ink-in-
dex ]
[, SELECT=
select-op ]
[TEST= test-
exp
[, INK= ink-in-
dex ]
[, SELECT=
select-op ]]
[, ...]
test-exp
The format and syntax of a test-exp are defined in the
"Test expression definition " section. The whole line
or a part of it is printed with highlight colour if the
test-
exp is satisfied.
ink-index
Specifies the ink to be used to print the text data. The
ink-index refers to the current inklist (IDR ILIST)
specified by the OUTPUT IDR parameter.
Only references to primary colours are allowed.
select-opt
Specifies whether the whole print line or a part of it to
be printed in highlight colour. The
select-opt format is
one of the following:
select-opt =LINE
The whole line is printed in highlight colour
select-opt =( offset , length )
Specifies an offset in bytes (relative to zero) from the
beginning of the print line for length characters to be
printed using the selected ink.
The default for
select-opt is LINE
Y Y N