Océ CS6410 Basic Operation Guide
84
At installing ink trays, be sure to insert each tray into its correct slot position of the ink box.
Note that ink tray position is decided depending on its ink color.
R E M O V E
L g 8 I N K P A C K
Ink color
Ink color at 8-color
assignment
LCD indication
Ink color at 4-color
assignment
Slot position
Slot position
CAUTION
- Do not remove ink tray in the following cases. Otherwise, ink may spill in the Printer depending on the Printer
state, which may damage the Printer.
• The Printer is not powered on because the power was interrupted or because the circuit breaker turned off the
Printer.
• An error other than ink end has occurred.
- Do not touch the contact point in the ink pack’s plate.
1
Knob
Ink box cover
Push the knob of the ink box cover to open the
ink box.
2
Ink tray
Confi rm the color of the ink pack to be replaced,
and pull its ink tray out of the Printer.
3
Plate
Push two claws
Ink tray
Ink pack
If no ink pack is installed on the ink tray, go to the step
4
.
Take the empty ink pack out of the ink tray.
(1) Push the two claws at the lower part of the the ink
pack's plate, and pull up the plate.
Install and replace an ink pack
Summary of Contents for CS6410
Page 98: ......
