19
Introduction
For your basic operation
Maintenance
When encountering a problem
Appendix
Appearance / Main components and their functions
Printer front (take-up side)
Operation panel
Provided with LEDS and LCD to
display printer status and keys to
set functions.
Media drying fan
Equipped to dry ink after printing.
Pressure control knob
Switches the media pressure force.
Take-up direction switch
Selects a media take-up direction.
Take-up reel switch
A switch to wind media automatically
Media feed switch
A switch to feed media automatically
Capping cover
Opened when cleaning the
capping unit or the carriage.
Wiping cover
Opened when replacing the wiper
blade.
Protection bar
Placed to protect media surface
just after the print.
Front cover
Must be closed during printing.
Tension bar guide
Applies tension to the media.
Tension bar
Placed to apply a proper tension to
media.
Ink box cover
An inlet to set ink (Note: Displayed
as “INK COVER” on the LCD.)
Scroller
#UJCHVVQHGGFQTYKPFOGFKC
Introduction
Appearance / Main components and their functions / Online and offl
ine / Supported media
Printer rear (supply side)
Take-up reel switch
A switch to wind media automatically
Subcartridge cover
Covers the subcartridge insertion
slots.
On the LCD, subcartridge is
displayed as subtank.
Waste ink bottle unit
Contains a waste ink bottle
Media feed switch
A switch to feed media automatically
Caster
Unlocked to move the Printer and
locked to immobilize it.
Printer power inlet
Printer power switch
Heater power inlet
Heater power switch
USB connector
Connected to the printer server.
Pressure control knob
Switches the media pressure force.
Summary of Contents for CS6410
Page 98: ......
