Oce CS6410, Basic Operation Manual

Page: 37 / 98

37
Introduction
For your basic operation
Maintenance
When encountering a problem
Appendix
To load media on take-up reel
This section explains the procedure, taking in TENSION winding mode for instance.
1
Install a paper tube on the Océ CS6410’s scroller and scroller fl ange.
1
2
3
The roll spacer prevents the paper tube
from bending at the center due to the
media weight.
Remove the two screws and move the roll spacer to the center of the
media. There are three screwing positions.
Paper tube
Roll spacer:
Roll spacer Do not move this roll
spacer.
Insert the scroller into the paper tube,
determine the distance between the
media edge and the flange.
Paper setting
gauge
Flange
Attach the paper
setting gaugeʼs
flange side to the
flangeʼs spoke side.
Rotate the handle clockwise as far as it
will go, and then secure the scroller at the
point.
Handle
(1) The flange spacer has teeth. Push it as far as
it will go.
(2) Match the flange stopper with the claw of
the flange spacer
(3) Tighten the knob to secure the flange
spacer and the flange stopper.
Knob
Paper tube
Scroller
Flange stopper
Flange spacer