Océ CS6410 Basic Operation Guide
18
Environmental conditions
Operating temperature and humidity levels
Use the Printer within the temperature and humidity levels shown below.
Temperature: 15°C to 30°C (60°F to 80°F)
Humidity: 30% to 70%
To obtain better print quality, use the Printer within a temperature range of 20 to 25°C (68 to 77°F).
To ensure a stable and good print quality, the Printer slows down the print speed when the head
temperature exceeds 40°C (104°F).
NOTE
- If the Printer is not used at the operating temperature and humidity ranges, the print may be stopped or the print quality may be
degraded.
- It takes time for the Printer to reach the operating environment temperature and humidity.
- To ensure good print image quality, it is recommended to keep the room temperature 20 to 25°C, 68 to 77°F and use the Printer
after 1 hour.
Places where the Printer must not be installed
Do not install the Printer in the following places.
Places near fi re
Places exposed to direct sunlight
Places subject to vibration
Places with excessive dust
Places subject to extreme changes in temperature or humidity
Places near an air conditioner or a heater
Places where the Printer may get wet
Places exposed to direct exhaust air from an air vent
Places near a diazo copier that may generate ammonia gas
Places with poor ventilation
Unstable places
Summary of Contents for CS6410
Page 98: ......
