Oce CS6410, Basic Operation Manual

Page: 34 / 98

Océ CS6410 Basic Operation Guide
34
11
With pressing the media
edge guard’s your side part,
move each media edge
guard. Align each media edge
guard’s notch to the media
edge.
(1) (2)
Notch
Set the media edge guards.
(1) With pressing the media edge guard’s your side part,
move each media edge guard to the media edge.
(2) Align each media edge guard’s notch to the media
edge.
Check that the media edge guards are not under the
media or thick media is not caught by inserting it
forcibly.
12
Close the front cover.
13
C H E C K E D G E G U A R D
✻
O K ?
Press the key.
14
R O L L / S H E E T : S H E E T
S E L E C T M E D I A
R O L L / S H E E T : R O L L
Select [ROLL] and press the key.
Either [roll] or [sheet] can be selected with the or
key.
Here, select [roll] and press the key.
(To return to the media selection, press the
CANCEL
key.)
15
S E L E C T M E D I A
M E D I A : P A P E R
・・・
S E L E C T M E D I A
M E D I A : B a n n e r
Select [Banner] and press the key.
16
S E T R E M A I N I N G M E D I A
✻ ✻ ✻ ✻
m
C H E C K
S L A C K E N M E D I A
Enter the remaining media length and press the
key.
- In case of the sheet media application, this message
is not displayed.
- When the remaining media length is not determined,
only press the key without entering the length.