Oce CS6410, Basic Operation Manual

Page: 55 / 98

55
Introduction
For your basic operation
Maintenance
When encountering a problem
Appendix
10
Use the advance/rewind switch to create a slack inside the peel roller. Put the supply-side tension
bar on the slack of the media at the supply side. See P. 35.
Printer rear (supply side)
Peel roller
Peel roller
Scroller fl ange
Tsnsion bar
11
C L O S E C O V E R
C H E C K E D G E G U A R D
✻
O K ?
Set the media edge guards, and close the front
cover.
12
S E L E C T M E D I A
R O L L / S H E E T : B A C K
Select [BACK] , and press the key.
With the or keys, select [BACK] .
13
S E L E C T M E D I A
M E D I A : B a n n e r
Select the media type.
With the or keys, select the media type.
14
C H E C K
S L A C K E N M E D I A
Check the media slack.
15
P R E P A R I N G M E D I A
P L E A S E W A I T
- When the media setting is successfully completed, the
Printer returns to online or offl ine state.
- If the media setting is not completed, an error message ap-
pears. Retry the procedure from step
7
.
The print head should be cleaned before starting
second side printing.
16
Start printing on the Second side of the media.
Check the RIP data.
- Note that the data transfer from the RIP diff ers
by 180 degrees between fi rst side and second
side.