Oce CS175 Phase 3, User Manual

Page: 88 / 466

4 Setting up network printing
4-44 CS175 (Phase3)
Setting the Macintosh computer
Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
2
Reminder
For network settings, consult the network administrator.
For printer driver installation, refer to "Installing the printer driver" on
page 3-3.
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not
required to change the settings. Bonjour/Rendezvous is a Mac OS X
function. For Mac OS 9.2, connect using AppleTalk.
For Mac OS X
1
On the Apple menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the TCP/IP tab.
5
Select the items from "Configure" that correspond to the network
settings for the Macintosh computer that is connected to the network,
and then set the IP address and subnet mask.
6
If using an AppleTalk connection, click the AppleTalk tab, and then
check that the "Make AppleTalk Active" check box is selected.
7
Click the close button at the top left of the dialog box.
The "Apply configuration changes?" message appears.
8
Click the [Apply] button.
The changed settings are saved.