Oce CS175 Phase 3, User Manual

Page: 48 / 466

4 Setting up network printing
4-4 CS175 (Phase3)
Features of the network functions
This printing system is equipped with the following network functions to
flexibly support various network environments.
- Automatic selection of 10Base-T or 100Base-TX (Fast Ethernet)
- Obtains the IP address automatically from DHCP or BOOTP
- Printing with SMB printing (Windows 98SE/Me/2000/XP/Server 2003)
You can print in Windows 98SE, Windows Me, Windows 2000, Windows
XP, or Windows Server 2003 using SMB.
- Printing with LPR printing (Windows NT 4.0/2000/XP/Server 2003)
You can print with LPD/LPR using Windows NT 4.0, Windows 2000,
Windows XP, or Windows Server 2003. Windows 98SE and Windows Me
cannot be used.
LPR (Line Printer Request): This print request system can be used under
Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003.
Enter the queue name as [Print].
- Printing with Port 9100 (Windows 98SE/Me/2000/XP/Server 2003)
You can print (Raw print) using Port 9100 under Windows 98 Second
Edition, Windows Me, Windows 2000, Windows XP, or Windows Server
2003.
When using a Port 9100 connection under Windows 98 Second Edition
or Windows Me, it may be necessary to install the Peer to Peer Printing
Tool.
To obtain the Peer to Peer Printing Tool, consult the dealer where you
purchased this machine.
- Supports Novell NetWare Pserver and Rprinter (Nprinter)
- Supports the Novell NetWare print server functions and supports both
bindery mode and Novell Directory Service (NDS)
With NetWare
The Novell NetWare 4.x–6 print server functions are supported.
You can connect this printing system to a network using Novell NetWare
4.x—6 as the network operating system and send print jobs from the client
to the print server (network controller). The three modes supported are as
follows:
- Nprinter
- Pserver
- NDS/NDPS
2
Note
For details on the NetWare functions, refer to the NetWare operation
manual.