Oce CS175 Phase 3, User Manual

Page: 50 / 466

4 Setting up network printing
4-6 CS175 (Phase3)
Network connection methods that can be selected in each Windows
operating system
This chapter describes the settings that must be specified for network
printing.
Setting procedures differ depending on the method of networking printing
used (SMB, LPR, or IPP printing). Select the best method of network printing
for your Windows environment.
Network printing from a Windows operating system
* When using Port 9100 printing under Windows 98 Second Edition or Windows Me, the Peer to
Peer Printing Tool must be installed. For the details, refer to the table below.
Conditions when the Peer to Peer Printing Tool must be installed while using
Port 9100
*1
If the printer driver is installed using the installer while this machine is
connected to the network, the required Peer to Peer Printing Tool is also
installed automatically, and Port 9100 is created.
*2
The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4
Not required since standard operating system functions are used.
To obtain the Peer to Peer Printing Tool, consult the dealer where you
purchased this machine.
Proto-
col used Win-
dows 98
Second
Edition Win-
dows
Me Win-
dows
2000 Win-
dows XP Win-
dows NT
4.0 Win-
dows
Server
2003
SMB print-
ing TCP/IP,
NetBEUI o o o o o
LPR printing TCP/IP o o o o
IPP printing TCP/IP o o o
Port 9100
printing TCP/IP + * + * o o o
Operating system
Windows 98SE/Me Windows 2000/XP/2003
Driver type Using installer Not using in-
staller Using installer Not using in-
staller
PCL Not required
*1
Required Not required
*4
PostScript -
*2
PostScript PPD -
*3
Required -
*2