Oce CS175 Phase 3, User Manual, Page: 400 / 466

11 Various settings
11-110 CS175 (Phase3)
2
Reminder
To apply any changes to the settings for "IPX Setting", "Ethernet Frame
Type", "NetWare Print Mode", "Print Server Name", "Polling Interval",
"Printer Name", and "Printer Number", which are marked with an
asterisk, restart this machine (turn the main power off, then on again).
When turning the power off, then on again, be sure to turn the sub-power
switch off first, then the main power switch. In addition, wait at least 10
seconds before turning the power on again; otherwise, this machine may
not function properly.
Item Description
IPX Setting Specify whether to enable NetWare.
Ethernet Frame Type Select the frame type.
NetWare Print Mode Select "Pserver" or "Nprinter/Rprinter" as the operation mode
of the print server.
Print Server Name Enter the print server name (up to 63 characters, excluding / \ :
; , * [ ] < > | + = ? .).
Print Server Password Specify the print server password (up to 63 characters).
Polling Interval Enter the print queue scan rate (input range: 1—65535 sec-
onds).
Bindery/NDS Setting Select from "NDS" and "NDS/Bindery Setting".
File Server Name Enter the preferred file server name of bindery (up to 47 charac-
ters, excluding / \ : ; , * [ ] < > | + = ? .).
NDS Context Name Enter the preferred NDS context name (up to 191 characters,
excluding / \ : ; , * [ ] < > | + = ? .).
NDS Tree Name Enter the preferred NDS tree name (up to 63 characters, ex-
cluding / \ : ; , * [ ] < > | + = ? .).
Printer Name Enter the NPrinter/RPrinter printer name (up to 63 characters,
excluding / \ : ; , * [ ] < > | + = ? .).
Printer Number Enter the NPrinter/RPrinter printer number (input range: 0—
255).
User Authentication Setting Specify whether to perform user authentication with a NetWare
connection.