Oce CS163, User Manual

Page: 506 / 547

12 Utility mode
12-62 CS193/CS173/CS163
8
Specify a setting for "Synchronize User Authentication & Account Track".
– Synchronize
"ON (MFP)" is set and "Account Track" is set to "ON", this setting allows this machine to be used
simply by entering user authentication information the first time that the machine is used if the
corresponding account was specified during user registration.
When "External Server Authentication" is selected and "Account Track" is "ON", and once the
machine is used with the appropriate user authentication and account track information entered,
this setting allows the machine to be used simply by entering user authentication information by
being synchronized with the authenticated account.
– Do Not Synchronize
This setting requires that all information be entered for user authentication and account track each
time that the machine is used.
9
Touch .
The second screen is displayed.
10
Specify a setting for "When # of Jobs Reach Maximum".
– To skip the job when the limit specified with user authentication or account track is reached, touch
[Skip Job].
– To stop all jobs when the limit specified with user authentication or account track is reached, touch
[Stop Job].
11
Specify a setting for "Number of User Counters Assigned".
– Press the [C] (clear) key to erase the value, and then use the keypad to specify the desired value
(between 1 and 999).
– If user authentication and account track settings have been applied, counters can be assigned to
both accounts and users, and counts for both can be totaled.
12
Specify "Ticket Hold Time Setting".
– Use the keypad to type in the time. (1 to 60 minutes)
– Specify the holding time of Kerveros authentication ticket. The holding time setting is applied when
Active Directory is selected as the authentication server type.
13
Touch [OK].
– If the setting for "User Authentication", "Account Track" or "Number of User Counters Assighed"
was changed, the message "Are you sure you want to clear all data?" appears.