Oce CS163, User Manual

Page: 49 / 547

CS193/CS173/CS163 2-27
Before making copies 2
2.3.6 Automatically conserving energy (Low Power mode)
If no operation is performed for a specified length of time, the touch panel goes off and the machine
automatically enters a mode where it conserves energy.
This is the Low Power mode.
The machine can receive jobs even while it is in Low Power mode.
As the factory default, the machine enters Low Power mode after 15 minutes.
To recover from Low Power mode
1
Press the [Power Save] key.
2
The machine can receive jobs while it is warming up.
– The touch panel comes on again and, after the machine has finished warming up, it is ready to begin
printing.
2
Note
As the factory default, pressing the [Power Save] key causes the machine to enter Low Power mode.
Settings in the Administrator Settings mode can be changed to put the machine in Sleep mode instead.
For details, refer to "System Settings" on page 12-23.
The Low Power mode can also be canceled by pressing any key in the control panel or by touching the
touch panel.
!
Detail
The length of time until the machine enters Low Power mode can be changed.
For details, refer to "System Settings" on page 12-15 and page 12-23.