Oce CS163, User Manual

Page: 348 / 547

8 Application functions
8-68 CS193/CS173/CS163
3
Select the position of the binding margin.
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Page Margin" function, touch [No].
– If "Auto" is selected, the binding margin is set at the top or at the left.
– If "Auto" is selected for the binding position, load the original with the top toward the back of the
machine. If the original is loaded in any other orientation, the correct position will not be selected.
?
What happens when "Auto" is selected?
% The factory default setting is "Auto". Touch [Auto] to automatically determine the binding position
according to the orientation of the loaded original. If the original length is 297 mm or less, a binding
position along the long side of the paper is selected. If the original length is more than 297 mm, a
binding position along the short side of the paper is selected.
4
Using the keypad, specify the binding margin width.
– If "None" is selected, the binding margin width is set to 0 mm. When making double-sided copies,
the image orientation can adjusted without creating a binding margin.
? What happens when a value outside of the allowable range is specified?
% The message "Input error" appears. If "Input error" appears or if the binding margin was incorrectly
entered, press the [C] (clear) key in the keypad, and then specify the correct value.
?
How can the entered margin position be corrected?
% Without changing the margin width, change the margin position.
5
If necessary, touch [Image Shift].
The Image Shift screen appears.