Oce CS163 User Manual Download

Page: 407 / 547

CS193/CS173/CS163

9-13

Replacing toner cartridges and staple cartridges and emptying punch scrap box

9.3.1

To replace the imaging unit

Press the [Power] (auxiliary power) key.

Check that the touch panel is turned off.

Open the front door, and then set the main power switch to

–

Check that an imaging unit of the same color as the one to
be replaced has been prepared.

Press down to release the unlock lever of the imaging unit to
be replaced.

Pull the imaging unit towards you to remove it.

Remove the imaging unit from its packaging.

–

The imaging unit can easily be damaged by light. Leave the
imaging unit in the black protective bag until immediately
before it is to be installed.

–

Do not hold the top part of the imaging unit, otherwise the
PC drum may be damaged, resulting in decreased image
quality.

Summary of Contents for CS163




































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CS163

Reviews:

Related manuals for CS163

Brands by name

Popular brands

Oce CS163, User Manual

Search results

Summary of Contents for CS163

Reviews:

Related manuals for CS163

Brands by name

Popular brands