Océ VarioPrint 1055, User Manual, Page: 93 / 194

93
Simple copying
Using the automatic document feeder to
copy
Simple copying
Introduction
Use the automatic document feeder to copy your documents in a simple and quick
way. When you insert the originals, the automatic document feeder detects their
dimensions. If a matching paper size is loaded in one of the paper trays, this paper
will be selected for your copies. If the paper size of the originals is not available, the
most acceptable size for your copies is selected.
The following procedure describes a simple copy job. You can change the default
settings if your copy job has special properties (
see ‘The copy settings’ on page 162 ).
Note: If the paper orientation in this tray does not match the feed direction of the
originals, the Océ VarioPrint
®
1055/65/75 rotates the image 90
°
. The rotation
symbol will be shown in the feedback box.
Before you begin
■
Examine your originals to be sure that the automatic document feeder can handle
them (
see ‘Your originals’ on page 40 ).
■
If the originals are different sizes or types, use the Assemble jobs wizard to enter
the settings (
see ‘Your originals’ on page 40 ).
■
You can be asked to enter a PIN, coins or a credit card to start the jobs ( see ‘Need
PIN, coins or a credit card’ on page 37 ).
How to use the automatic document feeder to copy
1.
Place and align the originals face down in the automatic document feeder ( see ‘Place
originals in the automatic document feeder’ on page 43 ).
2.
Press the 'Copy' key.
[76]
[76] The copy job settings