Océ VarioPrint 1055, User Manual, Page: 103 / 194

103
Use the platen to create an enlarged or reduced copy
Use the platen to create an enlarged or reduced copy
Introduction
The platen is the location where you place one original that the automatic document
feeder cannot handle (
see ‘Your originals’ on page 40 ). The platen cannot detect the
dimensions of your original.
Before you begin
First make a test copy to check your copy settings, especially for a large job. Make
sure that the settings do not result in the loss of image information or grey borders.
How to create an enlarged or reduced copy from the platen
1.
Place the original face down in the left rear corner. Use the measuring guides on the
edges of the platen to locate the original correctly on the platen (
see ‘Place an
original on the platen’ on page 45 ).
2.
Close the cover of the platen.
3.
Press the 'Copy' key.
4.
Select '1-sided' in the 'Original' and 'Copy' boxes.
5.
Select 'No' in the 'Staple' box.
6.
Press the 'Paper' key.
7.
Select the required paper size in the 'Tray' box.
[85]
[85] Select A3/Tabloid 11x17
8.
Press the 'Basic settings' key.
[86]
[86] Select the enlargement and reduction
9.
Select 'Large steps' in the 'Enlarge or reduce' box.