Océ VarioPrint 1055, User Manual, Page: 147 / 194

147
Add paper to paper tray 1, 2 and 3
Add paper to paper tray 1, 2 and 3
Introduction
You can access the paper trays when you open the paper-compartment door. The
number of each tray is displayed on the paper trays.
Océ Service configures the paper size that can be used in paper tray 2 and 3. You can
use paper tray 1 for paper size A3/Tabloid 11x17, A4/Letter 8.5x11 and A5/Us Std
5.5x8.5 paper.
[133]
[133] The four paper trays
Make sure that you place the paper or special material correctly when you insert
labeled or punched paper.
When to do
Add new paper or special material when:
■
A message is displayed, to indicate that a paper tray is empty.
■
There is not enough paper for a large job.
■
You need special material for your job and it is not loaded in one of the paper
trays.
Before you begin
Check the paper to be sure it is according to the specifications ( see ‘Input Trays and
Output Bins’ on page 175 ).
Attention: The outer sheets and the edges of the sheets in a pack of paper can
be contaminated with glue from the wrapping. Do not use the contaminated
1
2
3
4
3
1
2